Korean scientists create solar equipment that produces 3.4 liters per hour without electricity

Korean scientists create solar equipment that produces 3.4 liters per hour without electricity
IN SHORT
  • 🔆 Unist researchers developed A Solarentalization technology Convert sea water into drinking water.
  • 🚫 The design addresses Salt collection By directing it to the edges of the photothermic material.
  • 🔬 The system reaches one Evaporation rate Of 3.4 liters per hour and overtype typical solar relaxation rates.
  • 💧 This breakthrough offers a Sustainable and scalable solution To global water shortages.

At a time when access to clean drinking water becomes more and more critical, the researchers are making considerable progress in solar development technology. A current innovation of the Ulsan National Institute of Science & Technology (Unist) shows a promising progress in this area. As the new technology uses the power of the sun, it converted the sea water efficiently into drinking water without relying on external power sources. This most modern approach not only promises to tackle the challenge of salt accumulation, but also offers a sustainable solution with minimal carbon emissions. With a new material known as LA0.7SR0.3MNO3, this system illustrates the potential of solar energy in coping with global problems with water shortages.

The device overcomes the challenge of salt accumulation

The challenge of salt accumulation has long -lasting technologies for solaries of solaries, which often leads to lower efficiency and increased maintenance costs. The new device developed by the Unist Research Team effectively deals with an innovative design. The system uses LA0.7SR0.3MNO3, a perovskit material that converts solar energy into heat. This process is improved by the formation of intra-band trap states, which facilitate the non-radiative recombination of photo-based electrons and holes and increase heat-freeing.

Japanese scientists break the efficiency barrier with revolutionary organic solar cells that could redefine global standards for renewable energies

This groundbreaking design contains a fluid flow with a director, creating a salt gradient that leads salt on the edges of the photothermic material. This strategic movement reduces pollution and slight shielding, frequent problems in conventional systems. As a result, the device reaches an impressive solar steam rate of 3.40 kg/m²/h (approximately 3.4 liters per hour) under standard sunlight conditions and at the same time ensures strong antifouling capabilities in complex environments.

“56,000 houses become a power plant”: Californian company creates the largest virtual energy source in the USA with revolutionary raster sharing technology

Breakthrough approach to improve efficiency

The development marks a significant breakthrough in improving the efficiency and durability of solar salt systems. The evaporation rate achieved by the new technology exceeds the typical rates that are observed under natural sunlight and are usually between 0.3 to 0.4 kg/m²/h. The durability tests have shown that the system can be operated stably in high -concentrated saline solution, which contains 20% salt, is stable, which is higher than the typical sea water content of the sea water.

“This miracle device saves millions”: co-scientists unleash every hour with gallons pure freshwater flooding communities with gallons pure fresh water

Dr. Saurav Chau, the main author of the study, emphasized the potential applications of this innovation beyond freshwater production. The inverse-L-shaped evaporator design not only offers a sustainable approach for water relaxation, but also for environmentally friendly resource recovery like the salt harvest. The use of LA0.7SR0.3MNO3 as an efficient photothermal material shows the promising future of solar energy in combating water shortages and sustainable resource management.

Breakthrough offers a practical and scalable solution

The innovative design of this solar salzage device offers a practical and scalable solution for the global water shortage crisis. By carrying out salt accumulation to the edges of the photothermic material, the system effectively prevents salt structure on the surface. This approach in combination with the use of oxid-perovkites shows the potential of the next generation of the next generation of the next generation to provide sustainable freshwater solutions.

Professor Ji-Hyun Jang, a key figure in research, found that the integration of innovative structural design into a photothermal material based on Perovskit led to the development of an inexpensive, electrical-free device. This breakthrough could be a player in the fight against water shortages. The researchers suggest that future developments could include robust evaporator systems that consist of several inverse L-shaped sun evaporators, which form a single module with a large area to further improve the efficiency and scalability of this technology.

The progress in solarentalization technology shows a promising future for sustainable water production. While the world deals with the challenges of climate change and resource shortage, innovations such as this hope for a more resistant and sustainable future. The question remains: How quickly can such technologies be implemented at a global level in order to effectively tackle the pressing problem of the water shortage?

This article is based on verified sources and is supported by editorial technologies.

Did you like it? 4.5/5 (21)

Leave a comment

Your email address will not be published. Required fields are marked *