We may receive a commission for purchases from left.
Although T-posts are an excellent solution for simple and temporary fences in the courtyard and garden, they will rarely come out of the ground without fighting. Try to just put it down with bare hands, and it is a fight that you almost guaranteed. You have some solutions that you can advertise here, including the use of your post driver in a tictok hack for removing T-posts in a pinch. But if the contributions are particularly difficult and you have a lot to remove, you will make yourself a service by investing in a fence post powder, such as the Maasdam Pow'R Pul100 (59.82 US dollars at Home Depot).
The Maasdam PP100 is a 36 1/2-inch lever so that you can multiply the force you have entered. With the long arm on the effort side and the short arm on the load side, your downward strength can easily generate over £ 1,000 lifting power and stuck plug -in posts by piece. The powder-coated steel structure provides a reliable performance and receives the evaluation of PP100 with a 4.6-star rating on the Amazon and the Home Depot website. A Home Depot user explains: “It is a manual post -puller, so do the work, but do the job really well. A real value at a low price.”
Users love the high -quality build of the PP100 and the simple and efficient use when removing posts without bending them. The buyer of Home Depot, David, noted: “No longer trying to pull her out of the ground. Would have acquired this tool years ago.” Versatility builds on its value. With a thoughtful arrangement of functions, you can use the Pow'R train to process a wide range of fence post types.
Use of the Maasdam Pow'R train to remove fence posts
https://www.youtube.com/watch?v=1LFJB7Y2_7O
The Maasdam Pow'R train works in a similar way to a book, with the arm rising and repositioning until the post comes out of the ground all the way. Since it has a small base that can tilt or sink into soft mass when applying weight, you may have to surround the falsifications of the remaining floor covering or another board to distribute the weight and support the post -powder. To remove a T-post, set up your Pow'R pull and place the C-shaped jaw around the post. Raise the lever at about waist height or a little higher and lock the jaw into one of the mail. Press the end of the lever to raise the post. As soon as you lower the lever as far as it will go, increase it back into the waist height and lock it into another post. Lift the post again. Repeat this process until the T-Post is removed.
Thanks to the hook attachment, the Maasdam Pow'r Pull PP100 can extract several fence post styles beyond the standard T-Post. Wrap a chain around the base of the post and attach it to the hook. If necessary, you can also push a metal plate pipe or even your postal driver over the end of the lever to create a fraudster. With a longer handle you can achieve more torque and make it easier to work from difficult workplaces after removal.
Why pull the Maasdam Pow'r to pull fence posts?
Just as a post driver can make it easier to install fence posts, the Maasdam Pow'r Pull PP100 makes a problem-free process. “Often imitated … never duplicated” is the claim of Maasdam, an innovator in the cable packaging industry since the 1940s. And as with all of its products, Quality Engineering is a trademark of the Post puller PP100.
A permanent build that consists of cast components and extremely strong alloy steel also stops the toughest posts. Backling work turns into simple work in just a few seconds. Although some complain of additional chains and other elements for certain contributions and operations, the users generally agree that the PP100 exceeds expectations. It is a great replacement for larger or more expensive devices even in some of the most difficult situations.
Regardless of the fence post, the PP100 is at least worth a try, even for deeply defined posts and hard floor. Joshua Appleby, Appeals of Amazon, described his experience: “The Pow'r of this Puller is amazing. I was able to pour more than 18 inch chain-link fence posts with eight inch concrete.” A reviewer on the Home Depot website, Jray, shared his process in a similar way to pull out a cemented fence run. He explained: “The posts with which we had some problems (and there were not many), we soaked the soil with about 1-2 gallons water to ensure that they do not suck in the ground, the powder, the water, the water to relax. This post-powder is a low-risk and inexpensive purchase and is an intelligent addition to a homeowner tool, even if it is only in a blue moon use.